How do we install LED solar pathway light

LED solar pathway light generates electricity by absorbing sunlight, so solar street lights have no cables, no accidents such as leakage, and no electricity bills. And it is widely used for rain and lightning protection. Many urban main and secondary arterial roads, residential areas, factories, parks, and tourist attractions have adopted solar street lights.

• What is the first step in LED solar pathway light installation?

• What is the second step of LED solar pathway light installation?

• What are the precautions for LED solar pathway light installation?

  
  

What is the first step in LED solar pathway light installation?

Install solar panels. First fix the battery board on the street lamp support frame with screws, then connect the positive and negative poles of the solar lithium battery pack with the power output line, and tie them tightly with cable ties. Finally, solder the connection of the power output line by electro-tinning. Fix the solar lithium battery pack on the solar panel, and then wait for the lamps to be installed.

What is the second step of LED solar pathway light installation?

Install LED light fixtures. Pull out a length of lamp wire from the lamp arm first, connect one end to the lamp port, install the LED lamp head at the lamp port, and connect the other end to the pre-buried alignment hole of the lamp pole. After making sure that the lamp arm is not tilted, tighten the screws on the lamp arm and the lamp pole to ensure that the lamp arm is fixed on the lamp pole. Finally, label the light wires in the pre-buried alignment holes of the light pole, pass through the four-point thin wire tube together with the power output line of the battery board, fix it on the battery board, and install the battery board on the top of the light pole . After everything is installed, check whether the screws at all joints are tightened. After the inspection, wait for the crane to hoist.

What are the precautions for LED solar pathway light installation?

1. Check whether the accessories are complete. Solar street lights are composed of six parts: solar panels, solar lithium battery packs, lamp arms, LED lamp holders, lamp poles and flanges. The accessories include screws and nuts at the connection, the power output line of the battery board, the light pole, and the light line in the light arm. Before installation, it is necessary to count the quantity of materials one by one to ensure the smooth progress of the installation process.

2. Pay attention to the wiring sequence. The solar street light should be connected to the power output line of the circuit board first, and then the light line to prevent the controller from being damaged due to the wrong exchange of positive and negative poles.

Zhongshan Sunde Lighting Co., Ltd. is a professional high-quality LED lighting manufacturer, founded in 2013, integrating R&D, production and sales, focusing on LED commercial lighting and outdoor lighting. Outdoor lighting flood lights, lamps, panel lights, street lights, solar light, solar products.